Vapor Smoothing - 3D Printing Finishes
Vapor Smoothing 3D Printed Parts
Xometry’s vapor smoothing service provides low-cost finishing for additive-manufactured parts, resulting in a surface finish that rivals injection molding.
Start A New 3D Printing Quote
STEP | STP | SLDPRT | STL | DXF | IPT | 3MF | 3DXML | PRT | SAT files
3D printing is one of the best ways to get low-volume production goods. However, plastic 3D printing tends to have one significant trade-off: parts with coarse surface finishes. Powder bed fusion processes like selective laser sintering (SLS) and HP Multi Jet Fusion (MJF) leave a matte, sugar cube-like surface finish. Fused deposition modeling (FDM) shows distinct layer lines. For the last 30 years, post-process surface finishing like abrasive media tumbling, hand finishing, or coatings have minorly improved the surface finishes of 3D printed parts. If cosmetics are a priority, engineers may choose other processes entirely like injection molding, machining, or urethane cast parts.
With the introduction of chemical vapor smoothing, a technology that smooths the surface of 3D prints and enhances mechanical performance via vaporized solvents, 3D printed plastics are now more suitable than ever for low-volume production. This process works on most 3D printed polymers and elastomers, including over twenty 3D printing materials available through Xometry. Read on to learn more about chemical vapor smoothing, its benefits, and its applications.
Xometry has adopted AMT’s PostPro3D chemical vapor smoothing technology. Unlike physical smoothing processes such as sanding or media tumbling, vapor smoothing does not remove material on the workpiece. Instead, a vapor finishing agent (FA 326) is introduced into a sealed processing chamber with the parts. Although the finishing agent is the same, different processing parameters are used for different materials and geometric features. Parts are racked, or hung, in a 600 x 400 x 400 mm chamber to maximize the surface exposure to the vapor. The vapor clings to the part surface where it creates a controlled chemical melt. This melt reduces the surface peaks and valleys by liquifying and redistributing material and evening the surface. The melt also has the effect of enhancing shine.
Once the parts are finished, the chamber is heated to evacuate the finishing agent to a collection vat. No residue is left on the parts. Smoothed parts are then ready for shipping or another secondary process such as dyeing.
What 3D Printed Materials Can Be Vapor Smoothed?
Compatible Materials for Chemical Vapor Smoothing through Xometry
| Material Name | Process | Quoting Process |
|---|---|---|
| Nylon 12 | SLS, HP MJF | Instant Quote |
| Nylon 12, Glass Bead | SLS, HP MJF | Instant Quote |
| Nylon 11 | HP MJF | Instant Quote |
| Thermoplastic Urethane, TPU 88A | HP MJF | Instant Quote |
| Polypropylene (PP) | HP MJF | Requires Review |
| Nylon 11 EX | SLS | Requires Review |
| Nylon 12, Carbon-Filled (CF) | SLS | Requires Review |
| Nylon 12, Aluminum-Filled (AF) | SLS | Requires Review |
| Nylon 12, Mineral-Filled (HST) | SLS | Requires Review |
The table above shows every Xometry material vapor smoothed, including those that may require a manual review. You can instantly quote select materials by choosing " Vapor Smoothing" under the " Finishes" drop-down menu.
Xometry will manually review vapor smoothing orders for specialty materials like SLS high-performance blends, Nylon 11 EX, Nylon 12 AF, Nylon 12 HST, and Nylon 12 CF. Please select " Other" as your finish option and submit the quote for an expert review.
Vapor smoothed parts have improved cosmetics and are comparable to injection molding surface finishes. Standard SLS parts typically have a surface roughness greater than 250uin Ra, but with chemical vapor polishing can improve to below 125uin Ra and as low as 40uin Ra. In some studies, chemical vapor smoothing improved material surfaces by 800%-1000%. It is important to note that chemical vapor smoothing redistributes surface material to provide a sealed, smooth surface but it does not create a polished surface. There will still be visible surface topology and minimal layer lines.
Other benefits of chemical vapor smoothing include:
- A uniform, sealed surface, on 3D printed parts
- Improved tensile, elongation, and flexural performance
- No extra coatings; the surface is the part's material
- Significantly reduced moisture absorption
- Closed loop, repeatable processing results
- Ability to polish non-line-of-sight features
- Retains features and dimensional accuracy
- No residual chemicals or media in features
- Improved cosmetics and enhanced colors
Chemical Vapor Smoothing for Health and Safety Products
Vapor Smoothing Passes Health and Safety Tests
| Test | Results | Details | Normative Reference |
|---|---|---|---|
| Food Contact Test | PASS | SLS printed PA-12 parts chemically vapor smoothed with PostPro3D does not affect the consumer health nor influence the quality of food. | (EC) 10/2011 Annex V, Chapter 3, Table 3, OM 3, 2 hours at 70°C. DS/EN1186-01:2002 DS/EN1186-03:2002 DS/EN1186-14:2002 |
| Skin Irritation Test | PASS | SLS printed PA-12 parts chemically vapor smoothed with PostPro3D did not cause a skin-irritating effect. | ISO 10993-10 (2013); ISO 10993-1 (2018); OECD TG 439 |
| Cytotoxicity Test | PASS | MJF printed PA-12 parts chemically vapor smoothed with PostPro3D did not cause a cytotoxic effect. | ISO 10993-5 (2009); ISO 10993-1 (2010); ISO 10993-12 (2012) |
| Microbiological Test on MRSA Bacteria | PASS | MJF printed PA-12 parts chemically vapor smoothed with PostPro3D show a reduction of bacterial growth quantified as 99.88% against MRSA | MOD ISO 22196: 2011 |
| Microbiological Test on E. coli Bacteria | PASS | MJF printed PA- 12 parts chemically vapor smoothed with PostPro3D show a reduction of bacterial growth quantified as 99.78% against E. coli. | MOD ISO 22196: 2011 |
The chemical used for vapor polishing is safe and the closed-loop process of AMT’s PostPro3D system ensures that there is no extra residue left on the parts after smoothing. In fact, studies have shown that vapor-smoothed SLS and HP MJF parts conform to and pass multiple biocompatibility and safety tests concerning food contact, skin irritation, cytotoxicity, and bacterial growth.
- Add radii to sharp internal corners to prevent rounded voids
- Keep wall and feature thicknesses above 0.040" (1 mm) to avoid distortion or defects
- Keep wall thicknesses uniform, similar to injection molding
- Be mindful that orientation-specific build lines may still be present, but smoothed
- Racking marks may be visible depending on how the work was held during processing
- Flexible materials, like TPU 88A, may have more surface imperfections versus rigid materials
On-demand Webinar: Everything You Need to Know about Vapor Smoothing 3D Prints
Join industry experts for a webinar on making smooth, cost-effective, mechanically enhanced 3D prints with our vapor smoothing finish.
Understanding and Preventing Vapor Smoothing Defects
8 tips to prevent vapor smoothing defects in your parts
Concept Models
Enhanced cosmetics, better coloration, and sealed surfaces can make vapor smoothed 3D prints showstoppers.
Rapid Prototyping
Vapor smoothing does not significantly increase lead times, allowing for highly functional parts in record times.
Direct Digital Manufacturing
3D printing vapor smoothing is a bulk finishing process, making it an ideal way to build large quantities of customized parts.
Get Started on Your 3D Printing Quote
Free shipping available for domestic 3D printing orders.